
Key Points
Aura Amps’ Diamond, designed by Vitor Mendes, is a Dual Rectifier-style distortion pedal with Tube, Bridge and Diode full-wave rectification. Each mode changes saturation, sizzle, heft and tightness: Tube is brighter and more open, Bridge darker and bassier, while Diode is tighter and chunkier.
Controls are Gain, Presence, Level, Bass, Mids and Treble. Suggested settings were Gain and Level maxed, Presence and Treble at 2 o’clock, Bass at 4, and Mids at 3, with adjustments between modes.
It was available from the Aura Amps Webstore for R$679.90, around $130, with four demos included.
After some protracted delivery troubles I finally have my hands on Vitor Mendes’ Aura Amps Diamond Dual Rec style pedal - as recommended by one of my readers for being the most authentic sounding MESA/Boogie Dual Rectifier Distortion variant currently available!
In fact this is the first of two Aura Amps pedals I am reviewing / featuring - with their MIAB White Sugar Overdrive/Distortion (Plexi + JCM800) up next.
What makes the ’Diamond’ so special is the fact that it has all 3 classic flavours of Rectification onboard. A Rectifier is a type of electronic circuit / device - originally Tube-based, while solid-state Diode-based more latterly - which converts AC current to the DC current all amps need to be powered with.
You can get Half-Wave Rectification (Single Rectifier) - which only tackles one polarity of the incoming AC current, while Full-Wave (Dual Rectifier) tackles both polarities and renders those into the DC current the amps need to run on. The 3 classic types of Rectification as featured on this pedal are all ’Full-Wave’ varieties - first the original single pair ’Tube’ variety, then the enhanced and improved - and more efficient dual-pair ’Bridge’ Tube variety - which is just an improvement of the classic Tube circuit, and finally the more modern solid-state ’Diode’ variety.
Interestingly - each of these options impact the output profile slightly differently and fairly significantly - delivering more saturation and sizzle, or more heft and tightness. You can think of the 3-way Rectifier switch on this pedal as being a sort of character control also to a degree - where I typically like it best on right-side Diode mode - which is a bit more tight and chunky!
Controls - Gain, Presence, Level, Rectification : [T]ube / [B]ridge / [D]iode, Bass, Mids, Treble.
Actually I say I like it best on Diode Mode, but I also really love the first Tube Mode which is brighter, more open and more searing / sizzling, versus the Bridge Mode which sounds somewhat darker and bassier to me. All 3 Modes are great really and inspire different forms / styles of playing - it’s actually really cool to hear the differences in character and output profile for each one!
All the other controls (knobs) work pretty much as expected - with lots of sweet-spots across the 6 dials and 3 modes - where each of the 3 Rectifier / Rectification Modes has an optimal ’tuning’. At this point I’m actually struggling to decide which of the Tube or Diode Mode I prefer more - bot sound tremendous!
While the other dials I seem to have fairly consistently parked with Gain @ Max, Presence @ 2 o’c, Level @ Max, Bass @ 4 o’c, Mids @ 3 o’c, and Treble @ 2 o’c. As I mentioned - some slight tweaking is often required when flipping between modes.
The Diamond Dual Rectifier Distortion is available to order on the Aura Amps Webstore - for R$679.90 which is around $130.
It’s for sure one of the most authentic feeling and sounding Dual Rec pedal types out there - pretty unique with its 3 different Rectifier Modes. And can sound as crushing and pounding as you like!
I certainly like it a lot!
