
Key Points
Becos FX’s CompIQ Pro Mini is a Blackmer VCA/RMS-level compressor with Hard/Soft Knee, Fast/Slow Auto-TIMING, Feed-Forward/Feed-Back, SCF low Cut/Boost around 90Hz, WET > DRY Mix, and five variable controls. Ratios run 1:1–Infinity:1 or 1:1–10:1; Threshold is -40dBu to +10dBu, Make-up GAIN -6dB to +20dB, with 5-segment LEDs.
Less granular than Stella and Yuna, it retains Hard Knee and high fidelity; TWAIN is the dual-band bass variant. Preferred settings are Soft Knee, Feed-Back, Fast, 3:1, low Threshold, unity GAIN and 50:50 Mix.
As of the stated date, the price was €249 direct, £219 from Joe’s Pedals, or ¥48,620 from Lep International.
So I finally complete my Becos FX CompIQ Pro Compressor Trifecta, which started with the Stella, was followed up by the Yuna, and is now fully rounded out by the most diminutive Mini Pro Edition in the range, there is an even simpler CompIQ Mini One - which is default Hard Knee, has just 4 controls - RATIO, Make-up GAIN, SENSE : Hi/Lo (THRESH), and WET > DRY Mix - alongside a number of auto/dynamic built-in functions - like Attack and Release Timings. As I prefer my compression super soft and subtle, that one’s probably not for me!
There’s also a larger mid-size Dual Band / Stacked Compressor Variant called the TWAIN - which is more intended for Bass players really, each channel is not as fully granular as the Stella, but mostly around the same granularity as the Yuna. But wish Hard and Soft Knee options on both channels!
I’ve really enjoyed my journey with Becos FX - which for me is the preeminent and leading Pedal Compressor brand, no one makes studio-capable compressors as fully featured as these - and they perform fantastically, really hi-fidelity. Generally available from Becos FX in Europe [Austria], Joe’s Pedals in the UK, and Lep International in Japan. This has long been my go-to brand for Compressors, even though I do favour a few!
Controls - RATIO : 1:1 to Infinity:1 for Feed-Forward / 1:1 to 10:1 for Feed-Back Mode, KNEE : Hard / Soft, THRESHold : Compression Trigger : -40dBu to +10dBu, 5-Segment LEDs, Make-up GAIN : -6dB to +20dB, WET > DRY Mix, Auto TIMING : Fast / Slow (Attack & Release), SCF Variable Side-Chain Filter : ±12dB @ 90Hz, 12dB/octave; Feed Mode : Feed-Forward / Feed-Back.

I typically like a soft, fairly subtle Compression, with a low Threshold - so it's almost constantly active - for that cool kind of gently enhanced sustain, but not really intrusive or sound-altering - it subtly gives the sound a touch more articulation and sustain - which is subtly evident in the feel when playing, while the audience can't really discern it much at all - unless they have hypersonic hearing!
This CompIQ Pro Mini has all the essentials, but not the full pin-point accuracy of its larger siblings - which are rather more granular. For a lot of players though - this is absolutely the perfect compressor for their board.
I quite like having the Stella and Yuna Models on the board - as you always have plenty in reserve - but there's probably a lot there that most won't use on a default or daily basis! Stella is the fully granular one with pretty much every parameter manually and surface refine-able.
The Yuna makes some concessions and looses the Hard Knee option entirely, but since two of its dials are dual function - it's control interface reaches beyond its 8 Controls - same number as the Pro Mini, but because the Yuna has 2 dual-function knobs - it means you essentially have 10 controls - with some further internal switches for further definition. Meaning that besides the Hard Knee option, Yuna has most of what the Stella has - while the Stella is still a touch more refined and granular - with all the key controls on the front surface!
The CompIQ Pro Mini has Auto-TIMING Attack and Release - either Fast or Slow Mode, and unlike the Yuna - it does have the Hard Knee option also - like its full-fat Stella sibling.
The CompIQ Pro for me has essentially a 4-Grade Sliding Scale from fully Hard to fully Soft Compression :
I prefer level 4! The Feed-Forward Mode is more precise, harder-hitting and more expansive overall - up to Infinity:1 Ratio, while Feed-Back is more on the feels, with less precision, Max 10:1 Ratio, and all-round a little looser and more subtle!

So the CompIQ Pro Mini has 3 x Binary Gears, with 5 fully variable controls - 3 Big, and 2 Small red ones. On the larger sibling Devices the SCF function can Cut / Boost both Highs or Lows, while for this Pro Mini edition it's Low Cut/Boost only - around the 90Hz Frequency cluster! Which makes this unit really great for Bass players too!
I love that there is a WET > DRY Mix, which goes from 100% Wet to 100% Dry CW - I almost always have it at or fractionally either side of Noon (50:50)!
My Preferred Settings are : RATIO @ c. 3:1 (9 o'c), KNEE : Soft, THRESHold @ c. 8:30 to 9 o'c, GAIN @ Noon (≈Unity±), DRY > WET Mix @ 50:50, SCF @ Noon (Stock / Normal), Auto-TIMING @ Fast, FEED : Feed-Back.
I have been hugely impressed with each of my Becos FX Compressors, this smallest one might not have all the bells and whistles of the Stella, but it's still incredibly mighty, and carries all the essentials with style, and yes with some Auto-Timing Dynamic auto-responsive functions. It still has the same core Blackmer VCA / RMS-Level Analog Engine of its larger siblings and maintain the same high fidelity - at a much smaller footprint, and a much more wallet-friendly pricing.
This Pro Mini is really easy to dial in too - you start with the 3 binary switches - deciding on how Hard or Soft you want the compression, and whether Fast or Slow Attack & Release. I then recommend you start with RATIO and THRESH @ 9 o'c, and the other 3 knobs at Noon. Those are the perfect starting settings - and you can be dialled in, in no time at all. I do it all by ear, and mark all the unity spots on the dials, and then push on just a fraction past those - such that I can hear and feel the benefit of the compressor - but it still impacts very subtly, and unobtrusively!
The award-winning CompIQ Pro Mini can be yours for just €249 direct from Becos FX, £219 from Joe's Pedals in the UK, and ¥48,620 from Leo International in Japan.

