
Key Points
Mooer’s Meta FX is a stereo workstation, demonstrated by Mike Hermans and Andertons, based on the 14-algorithm R7 X2 Reverb: Room, Hall, Church, Cave, Plate, Spring, Mod, Studio, Reverse, Warp, Shake, Crush, Shimmer and Dream. Its touchscreen expands control to Level, Decay, PreD, HCut and modulation parameters.
Three swappable firmware families—Reverb, Delay and Modulation—use Mooer Studio for Mac and Windows; only one loads at a time. Features include Infinite Mode, 100 presets, USB/TRS-MIDI, stereo I/O, headphone output and USB-C.
The 125×74×49mm, 230g pedal has a 1.28-inch touchscreen and costs £149 RRP in the UK.
So this edition, as demo’d by Mike Hermans - is in effect a massive upgrade on the 14 Mode Mooer R7 X2 Reverb which I have and love, with the same 14 Algorithms being :
Obviously for the R7 X2 you have limited onboard controls, while on the Meta FX you can not only access Level, and 3 Quick Access Params - Decay, PreD, and HCut, but you can tap the screen to access the full range of parameters, including ones like :
You need to get used to using the left knob to set levels and param values - you tap, scroll, and then tap on the appropriate param level bar on the screen - and then apply the level knob - rinse and repeat!
For the quick-access controls you press-hold one of the 3 small buttons and ajust the Level at the same time for Decay, Pre-Delay, and Hi-Cut.
It all looks pretty intuitive in Mike Hermans’ below demo.
Mike Hermans and Andertons are pretty much ahead of the game here - as the only ones featuring the pedal so far. All you have on Mooer is the Meta FX Mac and Windows App Downloads. No product reference yet, and no manual - so my only analysis has to be extrapolated from the Mike Hermans and Andertons details - along with my experience of the R7 X2.
If you liked the R7 X2, then this is a prettier and more expansive / more refined version of that really - where you can also download Delay Workstation or Modulation Workstation Firmware - only one can be loaded / deployed at a time - so I might eventually buy a 3 of those pedals - one for each Genre type. The other 2 Firmware downloads are based on the X2 D7 Delay, and I guess evolved in part from the Mooer Mod Factory. There weirdly isn’t a M7 X2, but there are several Modulation Algos on Mooer’s various Multi-FX Pedals - including the Mooer Prime M2. I must say I much prefer the control interface on this Meta FX!
It looks like the Reverb Firmware is the first out the door, details on the other two are still scant - while we pretty much know what’s likely in the Delay Firmware release.
There is a lot of mention that there are supposed to be 40 Algorithms per Genre / Effect Family, while I haven’t seen proper evidence of that yet - as Mike Hermans just refers to the same 14 Algos that are on the R7 X2 :
Regular Algorithms :
More Specialist Algorithms :

Technical Specs

