
Key Points
Electronic Audio Experiments’ Scattering Stereo Scatter Reverb digitally models the discontinued Hypersleep’s rare MN3011 BBD behaviour, expanding its six controls into 14 parameters, switches, presets and MIDI control.
Its four modes are X1, X2, MATRIX and NONLINEAR. Features include stereo I/O, analog filtering and dry path, morphing, assignable periodic/random LFO, 16 presets, CTRL for MIDI/expression/CV, Trails or buffered bypass, and firmware updates via MIDI Sysex.
It measures 121 × 94 × 38mm and draws 120mA typical, 200mA startup surge from 9VDC. MAP/RRP is listed as $399 / €499 / £399, with availability through EAE, Joe’s Pedals, Axe and You Shall Receive, and Effekt Boutique.
The EAE Hypersleep is a retired classic, retired because its core rare MN3011 BBD’s are no longer available.
"Unlike other BBD’s with one input and one output, the MN3011 uses an array of staggered delay outputs to produce a smeared-out echo. Feeding this echo back upon itself produces a reverberant texture."
So John has long toyed with reviving the Hypersleep in some fashion, and so the Scattering looks to evolve that concept somewhat - by digitally modelling the behaviour of the MN3011, and vastly expanding that feature set.
The Hypersleep had just 6 knobs - Rate, Space, Level, Depth, Mix, and Feedback.
Where the Scattering has no less than 7 knobs (each with secondary parameters), 4 push-button switches, and dual footswitches.
Controls - SPACE (Delay Tap Lenght) [Stereo Spread], DRY>WET MIX [Dry Kill %], PREAMP GAIN [Master Volume], 2-POLE LOW PASS FILTER [Morph Rise], DWELL/FEEDBACK [Morph Fall], LFO 1 RATE [FM LFO 2 Rate], LFO 1 AMOUNT [FM LFO 2 Amount], AUX SWITCH : Morph / Preset [Hold for ALT Page], MODE SWITCH : X1 6 Taps MN3011 style / X2 Double Length MN3011 style / MATRIX Network of Delay Lines > Infinity / NONLINEAR Swelling Envelope Tapped Delay Line, WAVE SWITCH : Periodic / Random [Hold for MOD Matrix], Preset : I | II | III, AUX Footswitch, ENGAGE Footswitch.
Rear Ports - 1/4" TRS In, 1/4" TRS CTRL / CV / MIDI, 1/4" TRS Out, 9V DC [-] 200mA.
4 x REVERB MODES
So when you compare the original Hypersleep controls - Rate, Space, Level, Depth, Mix, and Feedback to the Scattering. You can see that all those line up with parameters on the Scattering, but as the Scattering has Alt functions on each of the 7 knobs - you end up with 14 Parameters - plus all the Button switch options.
So John has modelled and expanded the Hypersleep - which new more potent DSP format allows you to further manipulate the essence of the Hypersleep - and then save those settings as presets. There is a far higher degree of granularity here too. So it’s basically a supercharged Hypersleep - with DSP modelling in place of the original MN3011 BBD Chips.
The Scattering Reverb is available (when in stock) direct from the Electronic Audio Experiments Webstore in the USA, Joe’s Pedals in the UK, Axe and You Shall Receive in Canada, and Effekt Boutique in Germany / EU.
This one’s definitely down on my acquisitions lest - while I have some existing priorities to target first - which were due to land in August, but look like they will be arriving in September instead.They need to have their innings before the Scattering takes over on that particularly slot.


